Mt. Morris Plant
404 North Wesley Avenue
Mt. Morris, Illinois 61054
United States
(815) 734-4121
Contacts
Brenda Cheever
Paper Buyer Supervisor
(815) 734-8681
(815) 734-8686 fax
brenda.cheever@qg.com
Ardell Watry
Assistant Warehouse Supervisor
(815) 734-8254
(815) 734-8378 fax
ardell.watry@qg.com
Directions
In Mt. Morris, Illinois, 4 blocks north of Highway 64, on Wesley Avenue. Mt. Morris is
approximately 95 miles west of Chicago and 25 miles southwest of Rockford.
Paper Specifications
Roll Paper Requirements and Specifications (PDF)
Manifest Information
Manifests should be sent electronically to Sterling Commerce Network, mailbox: ZZ WPC CDC RLI.
A copy of each manifest must be faxed to Paper Purchasing and a copy must be included
in the vehicle with the shipments.
Rail Delivery
This facility is on a direct siding of the Burlington Northern SanteFe. The BNSF has
contracted with Illinois Railway to provide switch service from Oregon, IL to Mt.
Morris. Ship no more than 2 railcars per day, per purchase order. Railcars are only
made available Monday thru Friday by Illinois Railway in Oregon, IL. Plan accordingly.
Truck Delivery
Ship no more than 2 trucks per day, per order, maximum 4 per site (mill/plant/warehouse).
All trucks must make a delivery appointment a minimum of 24 hours in advance. Non-adherence
to these shipping instructions and delivery requirements will result in storage or demurrage
charge-backs.
Roll Dimensions / Cores
| Press |
Max Width |
Max Diameter |
Max Weight |
Core Diameter |
Core Type |
Other Core Details |
| Wide Gravure |
104 |
45 |
7,000 lbs. |
3 |
FP |
Plugs required. HQ6 equivalent or better. Without notch or endcap. |
| Narrow Gravure |
78 |
45 |
5,500 lbs. |
3 |
FN |
Plugs required. HQ6 equivalent or better. Without notch or endcap. |
| Offset |
37.5 |
49 |
2,900 lbs. |
3 |
FP |
Plugs required. |
Additional Specifications
Relative to our Requirements and Specifications paragraph 3.2, the Mt. Morris Division will
reject an individual roll if 3 unknown paper causes web breaks to occur. Quad shall be
compensated according to the provisions of the Roll Paper Requirements and Specifications.
A 3" core should have an inside diameter not less than 3.010" or greater than 3.025".
|
